All surfaces to be painted should be clean, dry and free from grease and loose and flaking material. If mould or algae are present, treat with a fungicidal wash and remove with a scraper or stiff brush, then treat the surface again with fungicidal wall wash. Any lime wash, distemper or flaking paint should be removed. Chalky underbound surfaces should be dry brushed and treated with Stabilising Solution as directed. Wear a suitable face mask when creating dust. When using more than one tin, it is advised that you intermix the quantity required beforehand
Stir well before use and apply liberally and evenly by brush or roller. Do not thin except for absorbent surfaces when a small quantity of clean water may be added. For maximum durability we recommend applying two coats. The surface will be touch dry in 1-2 hours. Allow approximately 4-6 hours drying between coats under normal, well ventilated conditions. Do not apply when air or surface temperatures are below 10ºC or when rain is imminent.
Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use in warm soapy water and rinse thoroughly