Smooth Metal


0.25L, 0.75L

Coverage (per litre)

9 m²

Dry Time

16-24 Hours

Request colour card
Professional Painter

Product Details

Hard wearing and long lasting Smooth Paint for Metal is suitable for applying direct to rust on all interior and exterior metal surfaces with no need for a separate primer.


  • Hardwearing
  • Long lasting
  • Can be applied directly onto rust
The experts at Johnstone’s know that the key to a perfect finish is in the preparation so take your time now, follow the simple steps below and you will be rewarded with a gorgeous new look. Start by making sure all surfaces to be painted are clean, dry and free from grease and loose or flaking material. Any existing rust or loose paint should be removed. If necessary strip to a bare surface. If your metal has been previously painted rub down glossy surfaces with a fine waterproof abrasive paper and then rinse thoroughly. Please avoid inhaling any sanding dust and always wear a face mask if dry sanding.
Now you are at the stage where you are ready to begin painting so give the paint a thorough stir. Johnstone’s paints are made to the highest standard and are ready to use straight from the tin so there is no need for any thinners. For the best results apply by brush and make sure your brush is fully loaded
Once you have completed all your painting make sure you remove as much product as possible from your brush and then clean immediately using White Spirit or Turpentine Substitute.