All surfaces should be clean, dry and free from grease. Remove any loose or flaking paint. Rub down sound glossy surfaces with fine waterproof abrasive paper and rinse thoroughly to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Prime bare surfaces with an appropriate primer.
Ensure maximum ventilation during application and drying. Do not stir. Apply by brush. For best results load the brush generously. Apply liberally and evenly and avoid overspreading. Occasionally a small amount of liquid may appear in the tin, if this is not used in the first brushful, remove excess. Do not apply over polystyrene surfaces.
Remove as much product as possible from application equipment before cleaning. Replace lid firmly after use. Clean equipment immediately after use in White Spirit or Turpentine Substitute.